I bought the compact ROG g20aj from BestBuy a few years ago. Now I want to upgrade the graphic card, but ran into trouble. If I put in the new card, the monitor will show NO SIGNAL even if I only boot into the onboard GPU. I tried to put back the old card, which is GTX 750 and the new card is gtx 1050 ti, monitor still persists with NO SIGNAL. Before anyone ask, I did buy another PSU (180w+230w, and card only need 300w to run). I also did set jumpers to correct positions (by this, I meant that all bottom pins are moved upward, and the top pin is moved left). The card is definitely seated in properly. I suspected that since putting in the old card also won't work, then it must be that the PCIe slot is damaged as the onboard GPU still works.
All helps are appreciated... in advance
PS I did not post on ROG forum because there is a problem with sign up.
All helps are appreciated... in advance
PS I did not post on ROG forum because there is a problem with sign up.