P7h55m pro and 2x4gb gskill ripjaws 1600

Toggle sidebar Toggle sidebar
L

Long_5

Commendable
Nov 20, 2016
9
0
1,510
Hi guys, i got trouble when install a new kit of ram on my p7h55m pro.
With 2x2gb kingmax single side, it works fine. But when i replace them with 2x4gb gskill ripjaws 1600 singleside, it restarts before getting to bios. With 1x4gb gskill singleside, it works until the 4-color logo of win 7 appears and dump.
I really confused. Hope you guys would help me. Many thanks
 
Sort by date Sort by votes
C

Calvin7

Titan
Feb 19, 2013
11,725
334
76,490
Running DDR3-1600MHz depends on the CPU you are using.

It may involve setting the AI Overclock Tuner to D.O.C.P (Dram OverClock Profile) and then selecting the [DDR3-1600MHz] OC Profile in the BIOS.

I suggest you try reading the motherboard manual to see if your CPU supports those settings.
 
Upvote -1 Downvote
L

Long_5

Commendable
Nov 20, 2016
9
0
1,510
I've follow your guides. But as i said, when i installed 2x4gb gskill. It resets right before i can access to bios.
I tried removing one ram then i could get into bios, set everything as you said, but my pc just stops at the win7 logo and it dump.(it says IRQL_NOT EQUAL_OR_LESS and sometime BAD_POOL_HEADER)
 
Upvote 0 Downvote
Tradesman1

Tradesman1

Legenda in Aeternum
Jun 5, 2013
67,883
40
126,960
Which Ripjaws? the early - original RJs were made with low density memory ICs, which are compatible with the older model DDR3 mobos, since post 2010, DDR3 is made with high density ICs that aren't compatible - all the RJ X and RJ Z series of DRAM is made with high density ICs as are the newer releases of the original RJs. I'd look for the GSkill NT series of value DRAM, still available with low density ICs for compatibility
 
Upvote 1 Downvote
L

Long_5

Commendable
Nov 20, 2016
9
0
1,510
Ok, my problem solved. Yes, i cant believe that the solution is very simple. I met shop owner and asked for an exchange(he gave me another gskill ripjaws f3 12800dl9s-4gbrl kit - the same)then it perfectly works. i dont know how. Gosh!!!
Anyway, I m really happy now. Thanks for all of your helps.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom