Need info on if this build is good and have a few questions

DJZ12

Commendable
Nov 21, 2016
53
0
1,630
http://pcpartpicker.com/list/4qHpm8

First... yes I know the ram is a little overpriced

2) about ram... I hear that the i7 can't handle ddr4 3200.. and I also heard that it will work it u set up an xmp? Can someone please explain that?

3)I'm sticking with that case however I want to know if replacing the case fans with the two corsair leds would
to much of a difference? The two non led noctuas will be intakes in the front of the case

4)any motherboard suggestions other than the msi? If so it needs to work with the msi graphics card because I'm keeping that!

5) how would I plug all the case fans in if there's not enough slots on mobo? And if I have to plug into psu do they just automatically run at 100%?

That's pretty much it tho... I've asked many questions so far and Ik my CPU is good..... the cooler for it is fine..... the storage is good for now and the card is great... also know the psu works well with supporting it and yea pretty much

If you want to add anything else feel free to do so I'm open for suggestions however I need an explanation on why you chose that !

Thanks.
 
Solution
2) For start, without overclocking the CPU/mobo (XMP) the ram will work at the limit which the CPU can handle (this info you can check it on the CPU datasheet). Now, when you start to overclock the RAM, it mainly depends on the motherboard if it can handle it.

3) can't answer this mainly never used a NZXT case before.

4) Well, its a Z170A motherboard, its a really good one.

5) Yes, if you connect the cooler directly to the mobo, it will work at 100%. Normally we bought an adapter or something to control the speed of the cooler (notes: the cooler NEEDS to have 4 pin or something similar to control the power speed of it.

Now, talking about your build in general, i see everything fine, really charming build (lovely red-black themed!)
2) For start, without overclocking the CPU/mobo (XMP) the ram will work at the limit which the CPU can handle (this info you can check it on the CPU datasheet). Now, when you start to overclock the RAM, it mainly depends on the motherboard if it can handle it.

3) can't answer this mainly never used a NZXT case before.

4) Well, its a Z170A motherboard, its a really good one.

5) Yes, if you connect the cooler directly to the mobo, it will work at 100%. Normally we bought an adapter or something to control the speed of the cooler (notes: the cooler NEEDS to have 4 pin or something similar to control the power speed of it.

Now, talking about your build in general, i see everything fine, really charming build (lovely red-black themed!)
 
Solution