i7 6700k OC @4,6 1,275V

SvrakaEK

Commendable
Oct 26, 2016
40
0
1,530
http://Hello, i just OCed i7 6700k @4,6 1,275V

the temps are OK ( idle 20, max load 55-58 with stress test from AIDA )
Is this voltage ok, i see ppl are OC and using 1,3 or 1,35+ for 4,6ghz. I used the AIDAs stress test for 15min and the max temps were 55-58. Gaming on mafia 3 for about 2h and no problems, but i think the voltage is low somehow. Is it safe using it that way or what program i have to use to make another test for stability?
Thanks in advance :)

edit: btw what can i do so my cpu is not constant on 4,6...even when not on max load its still 4,6

https://postimg.org/image/swpdqabnx/
 
Solution
No more than 30 min imo, there's reports of Prime95 causing damage to CPUs for extended periods of time.
In regards to LLC, that's probably why you haven't had any issues, because it's been using around 1.3v anyway due to the overcompensation.

SvrakaEK

Commendable
Oct 26, 2016
40
0
1,530
hmm it seems level 1 is the highest
btw i found this from asrock, my mobo is z170 gaming k6 btw


http://www.kitguru.net/components/motherboard/luke-hill/asrock-fatal1ty-z170-gaming-k6-motherboard-review/10/

whats the recomended time for test with prime95? are 15-30min ok
 
No more than 30 min imo, there's reports of Prime95 causing damage to CPUs for extended periods of time.
In regards to LLC, that's probably why you haven't had any issues, because it's been using around 1.3v anyway due to the overcompensation.
 
Solution

SvrakaEK

Commendable
Oct 26, 2016
40
0
1,530
I set the core V in the bios to 1.325. In cpuz it shows 1.328, and in HWinfo the core VID was 1,235... Used prime95 for 15min, first 5min it was at 40-45 degrees, after that 64-68. Seems stable i think, atleast for 15min testing. But whats the difrence in core voltage and core VID why are they difrent, or the program is showing wrong numbers?