Help, my computer won't turn on :(

Toggle sidebar Toggle sidebar
Nukero

Nukero

Honorable
Oct 16, 2013
6
0
10,510
So I bought a msi gtx 1050 and when I tried to turn it on, the PC would just turn the fans and the lighs for like a sec and then it would turn back off...

All I did was remove a bit of dust from the fans and I added the thermal paste to my processor because it was missing it and then I hooked up the GPU.

I tried removing the GPU and start it again but it didn't work...

This is my PC build:
PSU: Thermaltake TR2 TR-600 600W
CPU: Intel Core i5-2500 Sandy Bridge Quad-Core 3.3GHz (3.7GHz Turbo Boost) LGA 1155 95W
Motherboard: ASUS P8H67-M PRO/CSM (REV 3.0) LGA 1155 [It has PCIe 2.0]
 
Solution
RealBeast
What do you mean, it was missing the thermal paste? Since day one or did you clean it off and replace it?

Things to check to start: (1) that all cables are well seated, (2) clear the CMOS (either with the CMOS jumper or unplug it and also remove the bios battery for a moment, (3) insure that the new card is well seated and that your memory is seated since you were near it and also the ATX12V -- the small power connector to the board.
Sort by date Sort by votes
RealBeast

RealBeast

Titan
Moderator
Sep 13, 2010
17,112
474
104,790
What do you mean, it was missing the thermal paste? Since day one or did you clean it off and replace it?

Things to check to start: (1) that all cables are well seated, (2) clear the CMOS (either with the CMOS jumper or unplug it and also remove the bios battery for a moment, (3) insure that the new card is well seated and that your memory is seated since you were near it and also the ATX12V -- the small power connector to the board.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom