i5 3570k oc?

bidmoon

Distinguished
Oct 25, 2011
29
0
18,530
I am on 4.4ghz with 1.235v and hovering around 75c with prime95.After i got that stable, i managed to push the CPU to 4.6ghz on 1.35v, a big jump in the voltage but a small leap in the mhz. also was hovering in the 93c.

To me, i don't see the point of putting that much voltage on so little gain, but again i want to know what are your thoughts on this.

- Maybe my next step would be to delid the cpu and hope for a 20c drop ;)
- Would a liquid cooler have any impact on temp drop?. I'm using a hyper 212.
 
Solution
I agree, if it takes that much voltage to reach the next multiplier it wouldn't be worth it in my opinion. That's a common scenario when the cpu hits its performance wall. Two things affect overclocking safely, heat and voltage. You can't keep pushing the cpu once either becomes a problem and in your case it's voltage. Since it's not overheating a larger cooler won't get you any further along, you're reaching the voltage limits and 1.35v is pretty aggressive for a 3rd gen i5. 1.3v is considered by many as the upper safe limit for 24/7 use on haswell/devil's canyon and for skylake it rises to 1.35v.

As far as delidding, I wouldn't. Your temps aren't a major concern, it's not going to get you any gains in the overclock so it's all risk...
I agree, if it takes that much voltage to reach the next multiplier it wouldn't be worth it in my opinion. That's a common scenario when the cpu hits its performance wall. Two things affect overclocking safely, heat and voltage. You can't keep pushing the cpu once either becomes a problem and in your case it's voltage. Since it's not overheating a larger cooler won't get you any further along, you're reaching the voltage limits and 1.35v is pretty aggressive for a 3rd gen i5. 1.3v is considered by many as the upper safe limit for 24/7 use on haswell/devil's canyon and for skylake it rises to 1.35v.

As far as delidding, I wouldn't. Your temps aren't a major concern, it's not going to get you any gains in the overclock so it's all risk no reward at this point. If you were still low on voltage but temps were out of control it might be somewhat of a last resort but not in this case.
 
Solution