In my institute I have installed three routers in AP mode. Two in LABs . One in Library. In this scenario user experience that they are able to connect only one router i.e if they connect to Library router in library and if they move to LAB they are not able to connect to Router in Lab. Although all router are configured in AP mode with DHCP disable and with same type of authentication (WAP2 PERSONAL) I am not able to understand the reason behind this issue.Please Help
AP not accessiable Issue
- Thread starter deven079
- Start date
Solution
woodson75
Distinguished
- Feb 5, 2013
- 847
- 12
- 20,015
I believe you need to set it up like this:
- Library router set to ip address of (example only) 192.168.1.1
- DHCP to use the range 192.168.1.4 - 192.168.1.254
- Lab router 1: set to ip address of 192.168.1.2
- DHCP disabled
- Identical wireless security setup as First Router
- Lab router 2: set to ip address of 192.168.1.3
- DHCP disabled
- Identical wireless security setup as First and Second Routers
- Library router set to ip address of (example only) 192.168.1.1
- DHCP to use the range 192.168.1.4 - 192.168.1.254
- Lab router 1: set to ip address of 192.168.1.2
- DHCP disabled
- Identical wireless security setup as First Router
- Lab router 2: set to ip address of 192.168.1.3
- DHCP disabled
- Identical wireless security setup as First and Second Routers
TRENDING THREADS
-
-
Question New installed W11 on sdd, D drive (HDD) goes to the 100% in seconds
- Started by Emily_Vin
- Replies: 8
-
-
Facebook
Twitter
Instagram