I recently put together a build with an Asus Z170-A, 6700k, and 8GB of DDR4-2400 Corsair LPX.
After I got it all setup in the case and all the wiring done, I plugged in the PSU and flipped the switch. I saw the little green LED on the motherboard turn on so the motherboard was infact getting power. When I pressed the case button, nothing happened. I then went ahead and pressed the power switch on the actual motherboard and still nothing happened.
I re-seated the CPU, unplugged and plugged in the 6 & 24 pin connectors and still the same issue.
My PSU is a 630w Rosewill 80+ bronze, which does in-fact work. After I couldn't get the new mobo/cpu/ram to work, I put together my old z97 again in the same case with the same power supply and it boots fine. Any thoughts on what it could be?
After I got it all setup in the case and all the wiring done, I plugged in the PSU and flipped the switch. I saw the little green LED on the motherboard turn on so the motherboard was infact getting power. When I pressed the case button, nothing happened. I then went ahead and pressed the power switch on the actual motherboard and still nothing happened.
I re-seated the CPU, unplugged and plugged in the 6 & 24 pin connectors and still the same issue.
My PSU is a 630w Rosewill 80+ bronze, which does in-fact work. After I couldn't get the new mobo/cpu/ram to work, I put together my old z97 again in the same case with the same power supply and it boots fine. Any thoughts on what it could be?
Facebook
Twitter
Instagram