Crucial mx 300 bad performance?
- Thread starter Tommynew
- Start date
Solution
SinxarKnights
Distinguished
- Jan 3, 2007
- 2,333
- 3
- 20,960
Looks normal to me. Slightly on the low end of the results but normal. If I had to guess, it is being throttled by the time it gets to this test (DQR/W/M). Overall it is on the low side of normal. Make sure you have the power plan set to high performance and make sure the system is actually idle when you run the test.
http://ssd.userbenchmark.com/Compare/Crucial-MX300-750GB-vs-Group-/3644vs10
http://ssd.userbenchmark.com/Compare/Crucial-MX300-750GB-vs-Group-/3644vs10
SinxarKnights
Distinguished
- Jan 3, 2007
- 2,333
- 3
- 20,960
A link to the results would be helpful. As I said, it could be throttling by the time it gets to that test (DQR/W/M) in the post above.
SinxarKnights
Distinguished
- Jan 3, 2007
- 2,333
- 3
- 20,960
Yeah I am going to go with thermal throttling. If possible make sure it has good airflow if you are going to run benchmarks on it. Otherwise I wouldn't really worry too much about it.
Your first run it was significantly higher:http://www.userbenchmark.com/UserRun/2197998
after that though it appears to suffer from degradation of performance. Then after about an hour break it goes back to normal: http://www.userbenchmark.com/UserRun/2198292 . Then again each run after that does poorly.
If it is any consolation, mine does the same thing. I am using a Trion 150 480GB. Our drives are very similar in performance and apparently thermal characteristics.
http://www.userbenchmark.com/UserRun/2199076 If you look at that, you can see mine has the same issue while just 30 mins ago it was fine. The deep queue 4k test really thrashes and and causes an overheating condition. I am using a Define R5 case and the SSD is mounted on the rear of the motherboard tray so it has zero airflow.
Your first run it was significantly higher:http://www.userbenchmark.com/UserRun/2197998
after that though it appears to suffer from degradation of performance. Then after about an hour break it goes back to normal: http://www.userbenchmark.com/UserRun/2198292 . Then again each run after that does poorly.
If it is any consolation, mine does the same thing. I am using a Trion 150 480GB. Our drives are very similar in performance and apparently thermal characteristics.
http://www.userbenchmark.com/UserRun/2199076 If you look at that, you can see mine has the same issue while just 30 mins ago it was fine. The deep queue 4k test really thrashes and and causes an overheating condition. I am using a Define R5 case and the SSD is mounted on the rear of the motherboard tray so it has zero airflow.
TRENDING THREADS
-
-
News Microsoft updates Windows 11 24H2 requirements, CPU must support SSE4.2 or the OS will not boot- Started by Admin
- Replies: 14
-
-
-
Question New Build GPU help- ASRock Steel Legend OC Radeon RX 7900 GRE - Keeps turning off
- Started by bp240
- Replies: 6
-
Question How can I make my AMD GPU scale *all* resolutions to 1080p, even resolutions that are "supported" by my TV?
- Started by Sol33t303
- Replies: 7
Latest posts
-
-
-
-
-
-
Question New Build, Fans Running, RGB working, no mouse, no keyboard, no display- Latest: drivinfast247
Facebook
Twitter
Instagram