So I received my rx480 today. Prior to today I had no graphics card and relied on the integrated graphics.
I installed the rx480 and the displays were not working. I figured it may be something in my bios. So I removed the rx480, booted to bios and turned off integrated graphics. Now I cannot see anything regardless of what I do.
How can I either reset my bios settings or get this rx480 to work? Thanks for any help.
edit: Well I was shorting the wrong pins because I can't read.
I set the Initial Display Output to PCIe 1 Slot under Peripherals in the BIOS. This changed nothing. When I have power to the rx480, I cannot get any display to work. The rx480 is powered. I see the fan going. I try every port I can for the monitor. I lack a display port cable so I am only trying the HDMI port on the RX480
2nd edit: The HDMI cable is actual from a VGA to HDMI cable if that affects anything.
I installed the rx480 and the displays were not working. I figured it may be something in my bios. So I removed the rx480, booted to bios and turned off integrated graphics. Now I cannot see anything regardless of what I do.
How can I either reset my bios settings or get this rx480 to work? Thanks for any help.
edit: Well I was shorting the wrong pins because I can't read.
I set the Initial Display Output to PCIe 1 Slot under Peripherals in the BIOS. This changed nothing. When I have power to the rx480, I cannot get any display to work. The rx480 is powered. I see the fan going. I try every port I can for the monitor. I lack a display port cable so I am only trying the HDMI port on the RX480
2nd edit: The HDMI cable is actual from a VGA to HDMI cable if that affects anything.