Computer I built not turning on at all! Please help!

Toggle sidebar Toggle sidebar
M

MekhiJ

Commendable
Dec 11, 2016
1
0
1,510
Computer I built not turning on at all. Please help! No fans, no lights, nothing. Completely dead. I've checked troubleshooting guides, read manuals, done everything I can think of but I'm completely stumped. I'm starting to think I've done something wrong, but I was very careful with all the components. Please help, pictures included, thank you. http://


Update: when I unplug the hard drive it turns on but it doesn't show anything on my monitor...


Late update: Fixed this two days after posting just forgot to update it again. Power supply was dead.
 
Solution
Slow Pri
~Sometimes reseating all the cables within your build can fix problems. (I've had my computer not turn on until I reseated my RAM and it fixed my issue)
~You may also try taking the 24 pin connecter with a paper clip while inserting one end into the Green wire and the other into the black wire (this powers on the PSU) if it doesn't seem to work you may have a faulty PSU.
~Try different outlets
Sort by date Sort by votes
Slow Pri

Slow Pri

Respectable
Feb 29, 2016
586
0
2,360
~Sometimes reseating all the cables within your build can fix problems. (I've had my computer not turn on until I reseated my RAM and it fixed my issue)
~You may also try taking the 24 pin connecter with a paper clip while inserting one end into the Green wire and the other into the black wire (this powers on the PSU) if it doesn't seem to work you may have a faulty PSU.
~Try different outlets
 
Upvote 1 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom