Currently I have a GA-Z170X-Gaming 7 with Samsung 850 EVO SSD in the SATA port 0 and a mechanical 3TB drive in SATA port 1. I recently bought an Intel SSD 600p Series (512GB, M.2 2280 80mm NVMe PCIe 3.0 x4, 3D1, TLC), but I didn't check if it was compatible with the motherboard when I bought it.
The compatible M.2 list on Gigabyte's website for this board hasn't been updated since March 2016 and the Intel SSD came out after that.
Also (assuming it works) is there any settings that need to be changed in the BIOS (other than pointing to the M.2 as the boot drive) that I should be aware of?
The compatible M.2 list on Gigabyte's website for this board hasn't been updated since March 2016 and the Intel SSD came out after that.
Also (assuming it works) is there any settings that need to be changed in the BIOS (other than pointing to the M.2 as the boot drive) that I should be aware of?