New GPU, after driver install no signal/display

jutas · Dec 13, 2016

Hello, I'm here again, I got new GTX 1050 TI MSI gaming x. And I installed it, and put 6pin power connector, and it started up with 16MB vga memory, I installed drivers, and after restart no signal detected.
But if I take out gpu and connect vga to onboard graphics it works, and if i uninstall drivers nvidia, and put my NEW gpu in, It starts up again. Can someone help ? ;/ Need fast help. :/
BTW, I can't do CMOS reset, because there is no jumper pins, or I can't find them... Motherboard GA-H61M-DS2 (rev. 1.2), I updated bios.

dangus · Dec 13, 2016

what do you mean it started with 16MB vga memory?

if you can get into the BIOS, you can just reset to defaults which is the same as CMOS reset.

jutas · Dec 13, 2016

Sorry that you don't understand some words, because i'm not native speaker.

By saying 16MB vga memory, I mean when New Gpu starts without drivers, in program called speccy it shows that display is dedicated memory of that gpu, i dont remember how it's saying now :/

dangus · Dec 13, 2016

i'd suggest disabling the integrated graphics for the CPU in the bios. plug your monitor into the new GPU and then boot the computer up. once you're into windows, it should automatically download a basic GPU driver. then, go to Nvidia's website and download their newest driver. go through the install process. you should be good to go after that.

in your BIOS, look for an option that lets you disable "integrated graphics" or disable "iGPU"

did you have a different graphics card installed before the new 1050 ti?

jutas · Dec 13, 2016

dangus :

So I had know some things now and I will try to explain my problem.
When I start windows with new gpu it shows no signal, but I connect VGa cable to onboard vga and my GPU is found, and I disconnect vga cable. So my gpu now is found and I install newest drivers from nvidia website. After install I restart computer, and No signal detected. It doesn't matter if I try to put vga cable nothing helps, BUT if I uninstall these drivers, everything goes to back of the story. (shows no signal, I put vga cable, and gpu is found and ....)

So I think that MY gpu can't be found with drivers, and I dont understand it why.. :/

On bios, I had selected primary PCIE-16x. (No option to disable integrated)

And you asked what I had before this gpu:
I had GTX 460 v2, It worked really well for 4years maybe, and I got artifacts, so I baked it, and it worked for 1year more.
So I bought Palit gtx 1050ti stormx, I installed it, Installed latest drivers, and it worked 3 hours. (2.5 hours web-surfing; 1hour GTA V; and 30mins of Farming simulator) And it BURNED/FRIED with smell.
So I RMA it, and asked to change gpu to other, because everybody on this forum and others said that its "Bad chip" Faulty card, Dead on arrival.
So I got new/this GTX 1050 TI Gaming X msi card.

So maybe any suggestions ? Tommorow I think I will get my computer to service to look at this problem, but maybe it's something simple ? :/ (Maybe it's psu fault, but i'm using this computer now on Onboard graphics)

Ensaru64 · Jan 25, 2017

jutas :

dangus :

So I had know some things now and I will try to explain my problem.
When I start windows with new gpu it shows no signal, but I connect VGa cable to onboard vga and my GPU is found, and I disconnect vga cable. So my gpu now is found and I install newest drivers from nvidia website. After install I restart computer, and No signal detected. It doesn't matter if I try to put vga cable nothing helps, BUT if I uninstall these drivers, everything goes to back of the story. (shows no signal, I put vga cable, and gpu is found and ....)

So I think that MY gpu can't be found with drivers, and I dont understand it why.. :/

On bios, I had selected primary PCIE-16x. (No option to disable integrated)

And you asked what I had before this gpu:
I had GTX 460 v2, It worked really well for 4years maybe, and I got artifacts, so I baked it, and it worked for 1year more.
So I bought Palit gtx 1050ti stormx, I installed it, Installed latest drivers, and it worked 3 hours. (2.5 hours web-surfing; 1hour GTA V; and 30mins of Farming simulator) And it BURNED/FRIED with smell.
So I RMA it, and asked to change gpu to other, because everybody on this forum and others said that its "Bad chip" Faulty card, Dead on arrival.
So I got new/this GTX 1050 TI Gaming X msi card.

So maybe any suggestions ? Tommorow I think I will get my computer to service to look at this problem, but maybe it's something simple ? :/ (Maybe it's psu fault, but i'm using this computer now on Onboard graphics)

Did you have any luck? I'm having a similar issue myself. I'm really hoping it's not a faulty card as it'd be a hassle to have this RMA'd. Basically the graphics card is installed. I went through the usual DDU stuff. I connect the monitor to the card and it boots. But whenever I try to install the driver, midway into installation my monitor times out and goes into power saving mode due to no signal. Then shortly afterwards, my PC reboots and continually crashes.

jutas · Jan 26, 2017

Ensaru64 :

jutas :

Did you have any luck? I'm having a similar issue myself. I'm really hoping it's not a faulty card as it'd be a hassle to have this RMA'd. Basically the graphics card is installed. I went through the usual DDU stuff. I connect the monitor to the card and it boots. But whenever I try to install the driver, midway into installation my monitor times out and goes into power saving mode due to no signal. Then shortly afterwards, my PC reboots and continually crashes.

I don't think it's similiar problem, you said your pc crashes, and reboots.

Problem was my monitors DVI port. Somehow my monitors dvi port sends vatage impulses I think or something like that and burn GPU port.
Palit gtx 1050 ti died completely because of this, but they changed it (RMA)
MSI gtx 1050ti DVI i didn't tested it but i think its died, but HDMI works good, i'm using it.

I tried this monitor on LAPTOP HDMI TO MONITORS DVI, and laptops HDMI port got broken... (Tested on tv)

So In the end, I bought new monitor with HDMI port.
And I gave brother that "killer" monitor, because VGA port works well. :]

Search

New GPU, after driver install no signal/display

jutas

Commendable

dangus

Admirable

jutas

Commendable

dangus

Admirable

jutas

Commendable

Ensaru64

Commendable

jutas

Commendable

TRENDING THREADS

Latest posts

Moderators online

Share this page