I have a fx 8300 and asus 970 pro gaming/aura
I want to monitor the temps, HWinfo 64 is showing with a benchmark with prime 95 small fft, (i chosed cpu pakage) the same cpu temps as aida64 extreme zensors where showing
Hwinfo64 use to show the same temps as aux is in aida64 extreme, almost 20 c higher, ai suite 3 shows the same temps as aida64 extreme aux and that is 61 doing prime 95 small fft
Amd overdrive is surpose to show what temps are before the cpu reaches it thermal threshold,if temps are 29c it's roughly 29c before it shot's down
Amd overdrive shoved 1.1875 voltage/vid but cpu-z 1.332volt
I do not at all know what to use to monitor temps on my fx 8300 i use to use core temps with my intel cpu (often i had problem starting core temps, altough it always started when i got it to start and enabled it to aut start when i turn my pc on), it showed much higher temps on my fx 8300 so i started using HWinfo64
HWfinfo64 use to show same temps as ai suite3 so i though it was showing the right temps
But here someone say only to use amd overdrive to monitor temps, it showed temps before threshold so i used the cpu package in HWinfor64 to be shown in my taskbar since it matches amd overdrive reddit
Atm moment HWinfo64 + amd overdrive if i add the numbers, it's roughly 71c which should be t case and at 71 the core temp should be about 61c
It's just under prime 95 small fft temps with amd overdrive and HWinfo64 in imho themps are not that low, that means if it's true, i should without any problems be able to reach 4.5ghz, atm im running 4.2 ghz and use a Noctua NH-D15 cpu cooler
What is it with the voltage in amd overdrive 1.1875 volt
Cpu-z and HWinfor 64(+3.3v) is showing the same core voltage 1.56-1.368 volt
How do i monitor temps when i benchmark my cpu?
Im sooo lost trying to monitor cpu temps so i can stay under the temps where it throttles/shot's down (i think it's 71c but according to amd i should keep it at no higher than 61c,mabye 62c but that's it)
I want to monitor the temps, HWinfo 64 is showing with a benchmark with prime 95 small fft, (i chosed cpu pakage) the same cpu temps as aida64 extreme zensors where showing
Hwinfo64 use to show the same temps as aux is in aida64 extreme, almost 20 c higher, ai suite 3 shows the same temps as aida64 extreme aux and that is 61 doing prime 95 small fft
Amd overdrive is surpose to show what temps are before the cpu reaches it thermal threshold,if temps are 29c it's roughly 29c before it shot's down
Amd overdrive shoved 1.1875 voltage/vid but cpu-z 1.332volt
I do not at all know what to use to monitor temps on my fx 8300 i use to use core temps with my intel cpu (often i had problem starting core temps, altough it always started when i got it to start and enabled it to aut start when i turn my pc on), it showed much higher temps on my fx 8300 so i started using HWinfo64
HWfinfo64 use to show same temps as ai suite3 so i though it was showing the right temps
But here someone say only to use amd overdrive to monitor temps, it showed temps before threshold so i used the cpu package in HWinfor64 to be shown in my taskbar since it matches amd overdrive reddit
Atm moment HWinfo64 + amd overdrive if i add the numbers, it's roughly 71c which should be t case and at 71 the core temp should be about 61c
It's just under prime 95 small fft temps with amd overdrive and HWinfo64 in imho themps are not that low, that means if it's true, i should without any problems be able to reach 4.5ghz, atm im running 4.2 ghz and use a Noctua NH-D15 cpu cooler
What is it with the voltage in amd overdrive 1.1875 volt
Cpu-z and HWinfor 64(+3.3v) is showing the same core voltage 1.56-1.368 volt
How do i monitor temps when i benchmark my cpu?
Im sooo lost trying to monitor cpu temps so i can stay under the temps where it throttles/shot's down (i think it's 71c but according to amd i should keep it at no higher than 61c,mabye 62c but that's it)