Hey everyone, 1st time building a pc here and I've gotten it to the point where I can open up the BIOS and I was able to install Windows 10 to my SSD, but I was only able to do so while my video card was taken out.
When I start the system with the video card in, the VGA LED lights up for a couple seconds, then the BOOT DEVICE LED turns on and stays on. The card is definitely getting power, as it lights up and the fans come on.
Also, when I tried to boot through the SSD that I had installed windows on without the card in, the screen turns black, for a few seconds, then returns to the BIOS screen. I'm assuming this is due to there being no video card in, but I'm not positive.
I have checked the manuals for these components, but they don't seem to have the answers I'm looking for.
Also, the components I'm working with are...
Asus z170 - A
GTX 1070
Corsair Vengeance 2x8gb
I7 - 6700k
Crucial 1TB SSD
EVGA 650W Supernova Psu
How can I get all of these working properly together and boot into windows?
Any help would be greatly appreciated.
When I start the system with the video card in, the VGA LED lights up for a couple seconds, then the BOOT DEVICE LED turns on and stays on. The card is definitely getting power, as it lights up and the fans come on.
Also, when I tried to boot through the SSD that I had installed windows on without the card in, the screen turns black, for a few seconds, then returns to the BIOS screen. I'm assuming this is due to there being no video card in, but I'm not positive.
I have checked the manuals for these components, but they don't seem to have the answers I'm looking for.
Also, the components I'm working with are...
Asus z170 - A
GTX 1070
Corsair Vengeance 2x8gb
I7 - 6700k
Crucial 1TB SSD
EVGA 650W Supernova Psu
How can I get all of these working properly together and boot into windows?
Any help would be greatly appreciated.
Facebook
Twitter
Instagram