Sandisk Cruzer Fit
- Thread starter joni123
- Start date
Solution
190221
Reputable
- Aug 20, 2015
- 527
- 1
- 5,160
Code 28 means the device's driver is not installed.
you could try to force it to use a different thumb drive driver if you can get one (cruzer glide, lexar jumpdrive...etc) it *should* work with one of those drivers because most usb mass storage devices usually are one and the same, at least from my experience.
you could try to force it to use a different thumb drive driver if you can get one (cruzer glide, lexar jumpdrive...etc) it *should* work with one of those drivers because most usb mass storage devices usually are one and the same, at least from my experience.
Facebook
Twitter
Instagram