Three sticks 4gb ram

Toggle sidebar Toggle sidebar
M

Matheus_666

Commendable
Dec 15, 2016
2
0
1,510
I have bought 3 memory sticks of 4gb 1333Mhz from corsair for my computer.
i tried to use them but it doesnt work, my computer dont boot it turn on for a sec and restart to a loop. I put in the right slot but it didnt work...
MB:(Ivy Bridge) GA-B75M-D3H Gigabyte
 
Solution
The Paladin
you did not mention the CPU your using, so here is the information for you;

reading your motherboard manual located at https://www.manualslib.com/manual/433146/Gigabyte-Ga-B75m-D3h.html
your board can handle 4 x 1.5V DDR3 DIMM sockets DDR3 1600/1333/1066 MHz memory modules
NOTE: To support DDR3 1600 MHz, you must install an Intel 22nm (Ivy Bridge) CPU same goes for XMP

on this page https://www.manualslib.com/manual/433146/Gigabyte-Ga-B75m-D3h.html?page=11#manual
it speaks of installing them in pairs or a single in slot 1, so I will suggest you try this
(important) your slots for ram are marked DDR3_1,DDR3_2,DDR3_3,DDR3_4
memory sticks usually go in pairs DDR3_1 with DDR3_3 & DDR3_2, with DDR3_4

now you can try this since they...
Sort by date Sort by votes
The Paladin

The Paladin

Polypheme
Ambassador
Oct 5, 2016
9,663
60
67,340
www.texastandyrestorations.org
you did not mention the CPU your using, so here is the information for you;

reading your motherboard manual located at https://www.manualslib.com/manual/433146/Gigabyte-Ga-B75m-D3h.html
your board can handle 4 x 1.5V DDR3 DIMM sockets DDR3 1600/1333/1066 MHz memory modules
NOTE: To support DDR3 1600 MHz, you must install an Intel 22nm (Ivy Bridge) CPU same goes for XMP

on this page https://www.manualslib.com/manual/433146/Gigabyte-Ga-B75m-D3h.html?page=11#manual
it speaks of installing them in pairs or a single in slot 1, so I will suggest you try this
(important) your slots for ram are marked DDR3_1,DDR3_2,DDR3_3,DDR3_4
memory sticks usually go in pairs DDR3_1 with DDR3_3 & DDR3_2, with DDR3_4

now you can try this since they mention single stick is possible in DDR3_1
if you want to try to use 3 chipset your config could work ; try DDR3_1 & DDR3_2 with DDR3_4 leaving DDR3_3 empty
if that doesn't work then DDR3_1 and DDR3_3 is your only choice until you get another stick of ram for it

NOTE: DR3_4 is the closest slot to your CPU DDR3_1 is closest to edge of board, this is very important.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom