Is this Your mobo? https://www.asus.com/Motherboards/H110M-A/specifications/
Then you will need to make sure that you have the latest BIOS ver. beforehand.
But, You must make sure 100% that it is the correct model!
And the questions asked above?
When it comes to memory's there are a few things to keep in mind:
1. Always install memory sticks from one memory kit. They are matched together.
2. Always make sure that the chosen memory's is indeed supported by the motherboard and its processor.
Different types of memory's, different frequencies, timings etc. the memory stick with the lowest speed will always set the speed for the rest of them.
3. Very important that the voltage of the memory are supported by the processor; meaning that a memory stick with to much voltage let say 1.65V when the processor spec. clearly says 1.35V - will damage and shorten the processors life span.
4. Make sure that the height of the memory modules can fit under the CPU-cooler (if it is not original).
Use a memory configurator such as
Corsair]http://www.corsair.com/en-us/memory-finder]Corsair http://www.corsair.com/en-us/memory-finder[/url]
Kingston]http://www.kingston.com/us/memory/search/options]Kingston http://www.kingston.com/us/memory/search/options[/url]
G-Skill]http://www.gskill.com/en/configurator]G-Skill http://www.gskill.com/en/configurator[/url]
Etc.
But even then, som memory manufacturers recommend memory's with a little bit to high voltage, so make sure that the CPU manufacturer specs for that particular model of CPU is followed regarding the memory voltage.
Otherwise it will shortened the CPUs lifespan.
* Overclocking is always a risk.
For ex. a processor of 2:a generation Intel Core i3, i5, or i7 of Sandy Bridge alt 3: generation "Ivy Bridge" etc. these should have 1,5V +/- 5%- memory's.
For DDR3 memory: 1.5 volts, plus or minus 5%
For DDR3L memory: 1.35 volts, plus or minus 5%
For DDR4 memory: 1.2 volts, plus or minus 5%
Best regards from Sweden