-
Multi-million dollar Cheyenne supercomputer auction ends with $480,085 bid — buyer walked away with 8,064 Intel Xeon Broadwell CPUs, 313TB DDR4-2400 ECC RAM, and some water leaks
Will this kit work ?
- Thread starter takezow
- Start date
Solution
Dark Lord of Tech
Retired Moderator
- Aug 18, 2009
- 128,615
- 1,779
- 159,590
Get the 2x16 it puts less stress on the memory controller.
Both are compatible , but use the 2x16 for the reason above.
You will also need a small overclock on the CPU to get them to run at 3400mhz.
https://www.asus.com/Motherboards/Z170-PRO-GAMING/
Dual DDR4 3400 (OC) support
4 x DIMM, Max. 64GB, DDR4 3400(O.C.)/3333(O.C.)/3200(O.C.)/3100(O.C.)/3000(O.C.)/2933(O.C.)/2800(O.C.)/2666(O.C.)/2600(O.C.)/2400(O.C.)/2133 MHz Non-ECC, Un-buffered Memory
Both are compatible , but use the 2x16 for the reason above.
You will also need a small overclock on the CPU to get them to run at 3400mhz.
https://www.asus.com/Motherboards/Z170-PRO-GAMING/
Dual DDR4 3400 (OC) support
4 x DIMM, Max. 64GB, DDR4 3400(O.C.)
/3333(O.C.)/3200(O.C.)/3100(O.C.)/3000(O.C.)/2933(O.C.)/2800(O.C.)/2666(O.C.)/2600(O.C.)/2400(O.C.)/2133 MHz Non-ECC, Un-buffered Memory
Gskill memory compatibility with your board are listed here
http://www.gskill.com/en/configurator?manu=29&chip=2484&model=2530
scroll all the way to the 3200MHZ, you will see nothing regarding 32GB and nothing about 3400MHZ
maybe check with ASUS support page for latest listing of memory approved ?
http://www.gskill.com/en/configurator?manu=29&chip=2484&model=2530
scroll all the way to the 3200MHZ, you will see nothing regarding 32GB and nothing about 3400MHZ
maybe check with ASUS support page for latest listing of memory approved ?
Here's the latest QVL, seems those gskill models are not supported: http://
Guess I'll have to go with: http://, since its the only 16gbx2 kit on the list with the highest mhz.
Wonder if this kit would also work since it has same specs as that Corsair Dominator and is cheaper (low profile would be much better since I have a Noctua D15 which has a huge heatsink): http://
Guess I'll have to go with: http://, since its the only 16gbx2 kit on the list with the highest mhz.
Wonder if this kit would also work since it has same specs as that Corsair Dominator and is cheaper (low profile would be much better since I have a Noctua D15 which has a huge heatsink): http://
Get the 2x16 it puts less stress on the memory controller.
Both are compatible , but use the 2x16 for the reason above.
You will also need a small overclock on the CPU to get them to run at 3400mhz.
https://www.asus.com/Motherboards/Z170-PRO-GAMING/
Dual DDR4 3400 (OC) support
4 x DIMM, Max. 64GB, DDR4 3400(O.C.)/3333(O.C.)/3200(O.C.)/3100(O.C.)/3000(O.C.)/2933(O.C.)/2800(O.C.)/2666(O.C.)/2600(O.C.)/2400(O.C.)/2133 MHz Non-ECC, Un-buffered Memory
Both are compatible , but use the 2x16 for the reason above.
You will also need a small overclock on the CPU to get them to run at 3400mhz.
https://www.asus.com/Motherboards/Z170-PRO-GAMING/
Dual DDR4 3400 (OC) support
4 x DIMM, Max. 64GB, DDR4 3400(O.C.)
/3333(O.C.)/3200(O.C.)/3100(O.C.)/3000(O.C.)/2933(O.C.)/2800(O.C.)/2666(O.C.)/2600(O.C.)/2400(O.C.)/2133 MHz Non-ECC, Un-buffered Memory
Oh so I can just ignore the QVL and go with the MB specs then? that would be awesome.
Dark Lord of Tech
Retired Moderator
- Aug 18, 2009
- 128,615
- 1,779
- 159,590
Yes you can , it's compatible.
But D15 WILL INTERFERE WITH THEM.
Go LP modules with the D15 , YOU NEED TOO.
But D15 WILL INTERFERE WITH THEM.
Go LP modules with the D15 , YOU NEED TOO.
Dark Lord of Tech
Retired Moderator
- Aug 18, 2009
- 128,615
- 1,779
- 159,590
The front fins of the NH-D15 generally protrude over the RAM slots. Due to the recessed lower fins, it is still possible to use RAM modules with up to 65mm height in single fan mode. In dual fan mode, the front fan will sit above the RAM slots as well. In this case, Noctua recommends using standard height RAM (up to 32mm). However, in chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm (e.g. moving the fan 5mm up will increase the total height from 165 to 170mm and make room for 37mm tall modules).
From Noctua site.
Could anyone please suggest a memory kit that would work with a Asus Z170 Pro Gaming + i7 6700k, with the following specs:
- Low Profile
- runs at 3400 mhz
- has 2x 16gb modules
I found several 2x 16gb 3400 mhz kits, but none of them were low profile.
I'm asking this because I don't want to have issues fitting my Noctua D15 in my case (Thermaltake Suppressor F31), as pointed out by
SR-71 Blackbird.
Thanks!
- Low Profile
- runs at 3400 mhz
- has 2x 16gb modules
I found several 2x 16gb 3400 mhz kits, but none of them were low profile.
I'm asking this because I don't want to have issues fitting my Noctua D15 in my case (Thermaltake Suppressor F31), as pointed out by
SR-71 Blackbird.
Thanks!
Dark Lord of Tech
Retired Moderator
- Aug 18, 2009
- 128,615
- 1,779
- 159,590
TRENDING THREADS
-
-
News Apple debuts M4 processor in new iPad Pros with 38 TOPS on neural engine- Started by Admin
- Replies: 76
-
News Firefox user loses 7,470 opened tabs saved over two years after they can’t restore browsing session
- Started by Admin
- Replies: 58
-
Question How to maintain a GPU for as long as possible ?- Started by martinmigeot
- Replies: 6
Latest posts
-
-
-
-
Build Advice Complete new build, 7900X3D - 4070s compatibility & suggestions
- Latest: logainofhades
-
Facebook
Twitter
Instagram