Corsair Vengeance DDR3 1600mhz RAM doesn't work on GA-EP45T-EXTREME.

Toggle sidebar Toggle sidebar
K

Koolumba90

Commendable
Dec 22, 2016
5
0
1,510
I just bought 2x Corsair Vengeance DDR3 1600MHz ram 4GB (CMZ8GX3M2A1600C9B) (8GB in total) and I put it to my EP45T-EXTREME mobo but when I turned on, computer can't boot and starts beeping (fast and short beeps non-stop) I didn't even get to BIOS screen.
Mobo shows an C1 post error code, CPU fan doesn't working! (fan is correctly plugged to slot AND it's definitely working on other mobo) and after 10-11 secs computer has shut down, turns on again and starts beeping again and over and over again... I don't know what's going on... Can anyone help me with this? Maybe this ram is damaged or something? or maybe my CPU is too slow? (Q6600 on stock 2,4GHz FSB is 1066MHz)... Please resolve it.......

I tested it on another power supply but nothing changing...
-

specs:
- I Have Core 2 Quad Q6600 2,4GHz CPU
- Power supply 550W
 
Sort by date Sort by votes
K

Koolumba90

Commendable
Dec 22, 2016
5
0
1,510


- Yes, ram is clipped in absolutely fully.
- Yes, I cleaned cmos. (There is a CLR CMOS button on my motherboard so I pressed it a few times) but nothing helps T_T
 
Upvote 0 Downvote
K

Koolumba90

Commendable
Dec 22, 2016
5
0
1,510


I removed battery and jumped the pins for two-three hours and when I turn on, again.. nothing changing... same fast and short beeping all the time... and cpu fan still don't working.. idk why..
 
Upvote 0 Downvote
K

Koolumba90

Commendable
Dec 22, 2016
5
0
1,510


- I don't have different DDR3 RAM at this time, so I checked this later...
- Yes, I put one module at a time in each slot and still the same beeping.

what a crappy situation...
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom