Blue screen after ENABLING XMP

Toggle sidebar Toggle sidebar
T

ThompsonsX

Commendable
Dec 27, 2016
1
0
1,510
So my mobo its an Asus X99-A II, i have an i7-5820k and my ram its a corsair 3200mhz ddr4. The problem is that when i enable the xmp(i have already OC the processor to 4.5ghz) it just appears a blue screen. What do i have to do?
 
Solution
MeanMachine41
Hi ThompsonsX :)

Your MB supports up to 3333MHz OC DIMMs however your CPU officially supports DDR4 1333/1600/2133 so frequencies above 2133 are considered an OC and the IMC on your chip may not accept your XMP profile.
You can try Manually entering your SPD information in Bios however there is no guarantee they will work.

SPD info can be got from CPUz under the SPD info tab. Write down the Primary Timings info and voltage and give the values a try in Bios. Sometimes a slight increase in Dram Voltage will get them to work.

If not check with the MB QVL and choose a kit that have been tested at the correct recommended Frequency.
Sort by date Sort by votes
MeanMachine41

MeanMachine41

Judicious
May 8, 2014
5,195
336
33,390
Hi ThompsonsX :)

Your MB supports up to 3333MHz OC DIMMs however your CPU officially supports DDR4 1333/1600/2133 so frequencies above 2133 are considered an OC and the IMC on your chip may not accept your XMP profile.
You can try Manually entering your SPD information in Bios however there is no guarantee they will work.

SPD info can be got from CPUz under the SPD info tab. Write down the Primary Timings info and voltage and give the values a try in Bios. Sometimes a slight increase in Dram Voltage will get them to work.

If not check with the MB QVL and choose a kit that have been tested at the correct recommended Frequency.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom