My Pc
Cpu 4790K with Hyper 103 cooler
Motherboard Gigabyte B85-D3H
Rams: Viper Xterme
2*4Gb (2133Mhz)
2*2Gb (2133Mhz)
All four rams are completely compatible. Checked on other pc. Works on dual when tested on gigbyte z68 ud-3p
Problem:
>Now the problem is i cant use any of these rams on dual channel.
>All of the four rams tried separately and working perfectly on single.
> Tried following combinations
4Gb + 4Gb
2Gb + 2Gb
4Gb + 2Gb
2Gb + 4Gb
Only two rams works at a time on single channel either i choose slot 1&2 or 3&4 ?
When i install all four rams according to manual, pc wont boot up and keeps restarting again anad again without any beeps.
4Gb rams on slot 1&3 and 2&4 (dual channel) also dont work so do 2gb rams. Is there any way i can make them work.
Note: i know this motherboard only supports rams upto 1600Mhz. After enabling XMP profile 1 and 2 either ram starts works on 1600Mhz.
Also bios updated to latest one.
Cpu 4790K with Hyper 103 cooler
Motherboard Gigabyte B85-D3H
Rams: Viper Xterme
2*4Gb (2133Mhz)
2*2Gb (2133Mhz)
All four rams are completely compatible. Checked on other pc. Works on dual when tested on gigbyte z68 ud-3p
Problem:
>Now the problem is i cant use any of these rams on dual channel.
>All of the four rams tried separately and working perfectly on single.
> Tried following combinations
4Gb + 4Gb
2Gb + 2Gb
4Gb + 2Gb
2Gb + 4Gb
Only two rams works at a time on single channel either i choose slot 1&2 or 3&4 ?
When i install all four rams according to manual, pc wont boot up and keeps restarting again anad again without any beeps.
4Gb rams on slot 1&3 and 2&4 (dual channel) also dont work so do 2gb rams. Is there any way i can make them work.
Note: i know this motherboard only supports rams upto 1600Mhz. After enabling XMP profile 1 and 2 either ram starts works on 1600Mhz.
Also bios updated to latest one.