So I’ve been building my own PC the last few days, and I’m new to this but, I finally got everything in put together and turned it on. Power and lights everywhere. However, when I tried plugging in my monitor, I get a no signal. I have tried on multiple monitors and still nothing. My monitor and GPU have been working fine when tested on other consoles. I have even tried removing the GPU and plugging the HDMI, DVI, and displayport directly into my motherboard. Still nothing.Could someone tell me if I just made a stupid mistake or if I might actually have a real problem?
Components I used are:
ASUS B150M-A/M.2 LGA1151 DDR4 M.2
Intel Core i5 6500 3.20 GHz Quad Core Skylake Desktop Processor, Socket LGA 1151,
Gigabyte GeForce GTX 1070 G1 G
Corsair Vengeance LPX 16GB (2x8GB) DDR4 DRAM
EVGA 500 B1, 80+ BRONZE 500W Power Supply
Crucial MX300 1TB SATA 2.5 Inch Internal Solid State Drive
Components I used are:
ASUS B150M-A/M.2 LGA1151 DDR4 M.2
Intel Core i5 6500 3.20 GHz Quad Core Skylake Desktop Processor, Socket LGA 1151,
Gigabyte GeForce GTX 1070 G1 G
Corsair Vengeance LPX 16GB (2x8GB) DDR4 DRAM
EVGA 500 B1, 80+ BRONZE 500W Power Supply
Crucial MX300 1TB SATA 2.5 Inch Internal Solid State Drive