RAM frequency only maxing out at 1200MHz when i have 4 2400MHz Sticks. I have the hyperx fury ddr4 2400MHz ram
Cpu-z screens http://imgur.com/a/Vvuw4
Cpu-z screens http://imgur.com/a/Vvuw4
RAM frequency not maxing out
- Thread starter LKM2WE
- Start date
Solution
Ne0Wolf7
Reputable
- Jun 23, 2016
- 1,262
- 5
- 5,960
On that board you would have to overclock the RAM, hence the little * next to the number on newegg.
If I'm not mistaken, all you will have to do is add a bit of voltage, but I don't really play with my RAM (or have nad that particular problem) so consult this otherwise: http://www.tomshardware.com/reviews/ram-overclocking-guide,4693.html
If I'm not mistaken, all you will have to do is add a bit of voltage, but I don't really play with my RAM (or have nad that particular problem) so consult this otherwise: http://www.tomshardware.com/reviews/ram-overclocking-guide,4693.html
CelicaGT
Distinguished
- Jul 22, 2013
- 1,366
- 356
- 20,240
Back it up a bit here...DDR = Double Data Rate. The actual operating frequency of your RAM is 1200Mhz, because DDR transfers data twice per cycle your "effective" frequency is 2400Mhz. Your RAM is running at the correct speed leave it alone.
TRENDING THREADS
-
News US sanctions transform China into legacy chip production juggernaut — production jumped 40% in Q1 2024- Started by Admin
- Replies: 33
-
-
Question New pc build r9 7900x3d rtx 4080 super no post only ram rgb turns on- Started by Harvey Durward
- Replies: 5
-
-
-
RTX 4070 vs RX 7900 GRE faceoff: Which mainstream graphics card is better?
- Started by Admin
- Replies: 72
Facebook
Twitter
Instagram