Raid10(0+1) Stuck on Rebuilding

idoiloni

Commendable
Jan 6, 2017
1
0
1,510
Hello Techs,

I have a computer with me that will not boot beyond "no OS found, ctrl+alt+del to reboot, etc."
Before it gets to that it comes up with a quick screen for Intel Matrix Storage Manager.
The raid level is a RAID10(0+1), and the status says rebuild (bootable says yes), then when it continues to boot it just goes to the no os found screen and stays there.

Not sure where to go from here so any help would be appreciated. Thank you ahead of time!
 
Solution
Check the SMART status on the drives. It is possible one of them is starting to fail.

You should be able to save the data with RAID recovery software like R-Studio, UFSexplorer, DMDE to name a few.

S Haran

Distinguished
Jul 12, 2013
219
0
18,910
Check the SMART status on the drives. It is possible one of them is starting to fail.

You should be able to save the data with RAID recovery software like R-Studio, UFSexplorer, DMDE to name a few.
 
Solution