Asus B150 pro gamer/ aura MoBo. Just finished putting it all together a couple hours ago. None of the slots on the back work (VGA, USB, etc.) so there is no input to the monitor. It seems like the peripherals are working because the disc drive works. We did some trouble shooting by removing/ moving around RAM and graphics card. Nothing seems to change the outcome. The other thing that is strange is that it doesn't go through the Q-LED cycle to check components. Maybe that gives away the issue and I'm just not seeing it? I'm not sure. please help!
Asus B150 pro gamer/ aura MoBo Acting Strange on first boot
- Thread starter jbone77
- Start date
The ATX12v should be connected, it's either 4 or 8 pin. It wont go if it's not connected
And it is EATX12v
As the manual says
DO NOT forget to connect the 4-pin/8-pin ATX +12V power plug.
Otherwise, the system will not boot up.
And it is EATX12v
As the manual says
DO NOT forget to connect the 4-pin/8-pin ATX +12V power plug.
Otherwise, the system will not boot up.
It is fixed! Thank you. It helps to pay attention to grammar when reading instructions... We read "Connect the 4 + 4-pin ESP12V cable to Mobo (optional)." when in reality... it said "Connect the 4 + 4-pin ESP12V cable to Mobo. (optional)" Notice the placement of the period? because we didnt! anyways. thanks again for the help!
TRENDING THREADS
-
Question Using cloning software for a dying HDD which shows only 10% health ?- Started by Mashuumatics
- Replies: 1
-
Question Wifi card speed fluctuating on my Lenovo Ideapad pro 5 16APH8- Started by sirdariush
- Replies: 6
-
News Windows 11 will reportedly display a watermark if your PC does not support AI requirements- Started by Admin
- Replies: 24
-
Question Recovering an old version of a Notepad file in Windows 10 ?- Started by MC72
- Replies: 2
-
Facebook
Twitter
Instagram