Transferee my build to a new case last night everything goes well until today.. notice cpu temp is too high 80-90 lastnight its only at 40-50 . I dismount and put thermal paste fix the mounting and still getting same problem im using h100i gtx fron corsir i notice 1 of the tube from rad is hot? I also check if the pin is plug on cpu fan header and it is any help
Need help on my cpu cooler and temp
- Thread starter Kevin_230
- Start date
synphul
Champion
- Mar 11, 2011
- 9,477
- 7
- 54,965
It sounds like the pump either isn't connected properly, is running too slowly or is defective. Both hoses should be around the same temp. Make sure to reread the installation instructions to ensure everything is connected properly. The pump should be running full speed.
ShadowBeats
Reputable
- May 28, 2015
- 66
- 0
- 4,660
Well I am pretty sure one should be warm since it is the liquid going back into thr radiator. I wouldn't recommend any crazy transfering like switching from one case to another, the coolant might slightly leak pr evaporate. (Apologies if wrong)
TRENDING THREADS
-
-
Question New build: power button blinking and there's no display ?
- Started by AlanVW
- Replies: 0
-
Facebook
Twitter
Instagram