Put together new computer, switched on, no video output on monitor.
Have run through the checklist in this link http://www.tomshardware.co.uk/forum/261145-31-perform-steps-posting-post-boot-video-problems, still nothing.
Pretty sure there should be no compatibility issues as I'm replicating a built from scan.co.uk.
Component List:
Intel® Pentium® Processor G4560
(3M Cache, 3.50 GHz) (Stock fan)
ASUS H110M-A m.2 motherboard
Crucial 8GB DDR4 - 2133MHZ 1.2V CL15 Ram
Kingston SSDnow uv400 240GB ssd
500W PSU
Samsung monitor connected via HDMI (have also checked VGA connection)
Reasonably certain I can rule out PSU issues as I tested with an old PSU that I know works with no change.
Any help would be appreciated. Thanks.
Have run through the checklist in this link http://www.tomshardware.co.uk/forum/261145-31-perform-steps-posting-post-boot-video-problems, still nothing.
Pretty sure there should be no compatibility issues as I'm replicating a built from scan.co.uk.
Component List:
Intel® Pentium® Processor G4560
(3M Cache, 3.50 GHz) (Stock fan)
ASUS H110M-A m.2 motherboard
Crucial 8GB DDR4 - 2133MHZ 1.2V CL15 Ram
Kingston SSDnow uv400 240GB ssd
500W PSU
Samsung monitor connected via HDMI (have also checked VGA connection)
Reasonably certain I can rule out PSU issues as I tested with an old PSU that I know works with no change.
Any help would be appreciated. Thanks.
Facebook
Twitter
Instagram