Hi, recently I upgraded one of my spare PCs by changing out the CPU (Celeron 420 to Q8400). I previously had 2 x 2GB sticks of 1333Mhz DDR3 running perfectly fine in the system but after the upgrade the PC only posts with a single stick.
The motherboard gives off the beep code for bad memory whenever I put the second stick in any slot.
I have tried resetting the CMOS by removing the battery and using the jumper on the motherboard and I have made sure the DIMMS are fully inserted into the slots.
PC specs:
HP Pegatron IPIEL-LA3 motherboard (maybe being weird with the RAM because it's an OEM board?)
Core2Quad Q8400
2 x 2GB Samsung 1333MHz DDR3 (HP branded, one stick has memory chips on both sides, one has chips only on one side, maybe this is an issue?)
I was wondering if anyone would have any ideas on how to get the second stick working.
Thanks
The motherboard gives off the beep code for bad memory whenever I put the second stick in any slot.
I have tried resetting the CMOS by removing the battery and using the jumper on the motherboard and I have made sure the DIMMS are fully inserted into the slots.
PC specs:
HP Pegatron IPIEL-LA3 motherboard (maybe being weird with the RAM because it's an OEM board?)
Core2Quad Q8400
2 x 2GB Samsung 1333MHz DDR3 (HP branded, one stick has memory chips on both sides, one has chips only on one side, maybe this is an issue?)
I was wondering if anyone would have any ideas on how to get the second stick working.
Thanks