Solved

No Signal after install new GPU. NO SIGNAL ON INTEGRATED GRAPHIC TOO!

I'm using HP Pavilion P6-2275l and I just replace my old gpu with a new one. I changed from HD 5450 to GTX650.

The thing is after I install new gpu and turn on the pc, the monitor said "No Signal" for DVI.

So I change back to the old gpu i have and it turned out to be " No Signal" also.....

Lastly, I tried using in DVI of the maunboard to use the iGPU and it also turned out to be "No signal"!!

There's no way I can go to BIOS or Safe mode or anything!! What should I do guys?? I dont want to buy a new PC. PLEASE HELP!

P.S. The fan of the gpu is spinning but there are no signal on both DVI and DSUB
3 answers Last reply Best Answer
More about signal install gpu signal integrated graphic
  1. Best answer
    Try removing the RAM stick and put it in the other RAM slot, if that doesn't help, find a round, silver battery (CMOS battery) there should be a blue or red tab somwhere near it, you need to pull the tab of the 2 pins, and put it on the pins where it wasn't in the first place, leave it 15 mins and put it back in place. Turn on your pc and it should work.

    <removed by moderator>
  2. PlsHelpMeImKindaNewToThis said:
    Try removing the RAM stick and put it in the other RAM slot, if that doesn't help, find a round, silver battery (CMOS battery) there should be a blue or red tab somwhere near it, you need to pull the tab of the 2 pins, and put it on the pins where it wasn't in the first place, leave it 15 mins and put it back in place. Turn on your pc and it should work.

    If this helped you please select this as the best answer, im trying to get my first expert badge, thx.


    I tried switching the RAM slot and it suddenly worked fine. Thx Bro!
  3. No problem, and thx for the best answer
Ask a new question

Read More

DVI Display Panels and Monitors Displays Motherboards GPUs HP Pavilion