I've put together a new pc based around a z170 k3 motherboard (gigabyte) and an i7700k. I was going to go with a 6700k but they were out of stock. Case is nzxt h440.
I'm using vengeance 3200 ddr4 (2x8gb).
Case is powering up and fans are firing up. Motherboard is lit up with its LED strips and ram (led) is lit up also but the sticks flash on and off alternately. As the h440 has no speaker I can't hear any errors.
Tower doesn't cut out or turn off.
I have tried dvi signal from gtx 1060 - powered up ok fan spinning, and direct from motherhood. Nothing. Removed 1060, still no signal from board. Tried hdmi from board.
Both power cables from psu connected to board.
I'm suspecting the ram or the processor. Would l be getting the board lit up, etc. If the cpu was faulty?
Have tried moving ram, using one stick at a time but no difference.
Does anyone have any suggestions before l have a breakdown in a quiet room somewhere?
I'm using vengeance 3200 ddr4 (2x8gb).
Case is powering up and fans are firing up. Motherboard is lit up with its LED strips and ram (led) is lit up also but the sticks flash on and off alternately. As the h440 has no speaker I can't hear any errors.
Tower doesn't cut out or turn off.
I have tried dvi signal from gtx 1060 - powered up ok fan spinning, and direct from motherhood. Nothing. Removed 1060, still no signal from board. Tried hdmi from board.
Both power cables from psu connected to board.
I'm suspecting the ram or the processor. Would l be getting the board lit up, etc. If the cpu was faulty?
Have tried moving ram, using one stick at a time but no difference.
Does anyone have any suggestions before l have a breakdown in a quiet room somewhere?
Facebook
Twitter
Instagram