fx 8320e on a 78lmtusb3 board

cscarter

Commendable
Jan 14, 2017
3
0
1,510
hey everyone i have a fx 8320e on a 78lmtusb3 i have a few questions, first is in my bios i set my cpu volts to 1.36 to keep it under 1.4V because of my mobo being crappy. i ran occt cpu stability test for 2 hours and it passed with no problem, my highest TMPIN temp recored was 75C and i watched the last ten min of the test and it was setting at 70 even for the last ten mins, but my average cpu volts was 1.45 is that normal i set one volt in the mobo and in real time my volt were higher? is this safe or am i going to burn my mobo up if i keep my setting?


my cpu is stable at 4.4ghz and my vcpu is 1.36 in my bios.
 
Solution
For mine, Gigabyte says 90c. It was running 60 - 70c at this setup (see my sig) but after putting a small fan over it, it runs about 40 at most.

cscarter

Commendable
Jan 14, 2017
3
0
1,510
i have a hyper evo 212 on it my cpu temps are fine, its my vrms that heat up my mobo is not a good one i got for 25$ on ebay. lol looking at other forums most people say keep it under 1.4 cpu volts to not cook the mobo i set the LLC to reg in my bios and i have 4.2ghz stable at 1.38V. also i was woundering if anyone knew how hot the VRMS can get with out damage?

also thanks mike for the feed back.