Possible USB 3.0 fixes

CyberpowerPC07 · Jan 18, 2017

So, I just built my first pc last night and used a case one of my friends used to have. Essentially, everything is fine minus the two usb 3.0 ports on the front. The issue isn't that I don't have 3.0 slots on my mobo, it'seems just that it is simply full size usb plugs running from the port to the mobo. What can I do go get these hooked up?
Specs
i7 Skyland 6700k
Gigabyte z170x gaming 7
Hyper 212x Evo

Barty1884 · Jan 18, 2017

You have a 3.0 header at the bottom of the board, near the middle?

Which case is this? do you know? Are they 3.0 or 2.0 as those are different connectors. If they're just female USB on one end and male on the other, they might just be extensions for your rear I/O....... but that would be odd.

madmatt30 · Jan 18, 2017

You'll have to provide pics mate , not sure what the issue is

CyberpowerPC07 · Jan 18, 2017

The case is an Nvidia haf x. It's a male usb connector inside the case.

CyberpowerPC07 · Jan 18, 2017

I'll have photos in a few hours. Apologies.

madmatt30 · Jan 18, 2017

That case was designed before boards had USB 3 headers onboard mate , those cables are for routing to the back panel USB ports :-/

Barty1884 · Jan 18, 2017

As MM asked, can you provide pics? From the specs: http://www.coolermaster.com/case/full-tower/haf-x-nvidia-edition/
It appears to have both of those connecors MM linked. The left runs to near the middle on the bottom of your board and the right runs to the header slightly to the right of the 3.0 port. You have both 3.0 and 2.0 on the front panel.

madmatt30 · Jan 18, 2017

https://www.novatech.co.uk/products/cables/internaldatacables/usb3.0/usb3splatelp.html?gclid=CjwKEAiAwfzDBRCRmJe7z_7h8yQSJAC4corOcDJX9KXK35OBT-bt99z-rSwyn1EhehQjj-cJNRX4hRoC4Ubw_wcB#utm_source=google&utm_medium=base&utm_campaign=products

You can buy external usb3 pci slot plates , just remove the metal plate & plug them internally.

CyberpowerPC07 · Jan 18, 2017

I see, ah well. I partly assumed that but was hoping there was a fix. Thanks anyway

Barty1884 · Jan 18, 2017

Actually, looking again, there are two variants of the case (see the notes at the bottom of the page)
http://www.cmstore.eu/spare-parts/haf-x-usb-card/

One has simple 'pass through' where you run the front panel USB 3.0 to the back of your motherboard and it uses that port.
The second variant attached the the onboard 3.0 header.

Sounds like you have the original. Route them to the rear of the motherboard as intended, or you add additional 3.0 ports on the rear as MM linked.

madmatt30 · Jan 18, 2017

If you're USA , cheap & exactly what you need.
https://www.amazon.com/gp/aw/d/B007PODI1W/ref=mp_s_a_1_1?ie=UTF8&qid=1484765671&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=usb+3+header+to+usb+3+female&dpPl=1&dpID=41mjv%2B2-mBL&ref=plSrch

Search

Possible USB 3.0 fixes

CyberpowerPC07

Distinguished

madmatt30

Barty1884

Retired Moderator

madmatt30

Titan

CyberpowerPC07

Distinguished

CyberpowerPC07

Distinguished

madmatt30

Titan

Barty1884

Retired Moderator

madmatt30

Titan

CyberpowerPC07

Distinguished

Barty1884

Retired Moderator

madmatt30

Titan

TRENDING THREADS

Latest posts

Moderators online

Share this page