Prime95-BLEND TEST FAILURE NOT SOLVED

signtnight

Commendable
Jan 21, 2017
4
0
1,510
I have system
*AMD FX-8350
*KINGSTON HYPERX PREDATOR(2*8) 2133-1.6v DDR3(HX321C11T2K2/16)
*ASUS M5A97 EVO MB
*LLC is MEDIUM level.

I am a little bit knowledge about oc actually. I want to oc my system to 4.4ghz. My mobo supports 2133mhz at most as you know. I selected DRAM O.C.PROFILE(2133). Setted Vcore voltage to 1.3 volt at stable level according to Prime test and there is no problem with the small fft test.I run it about 30 minutes.But blend test failures not ended whatever I do. I think there is no problem with my rams because its new and tested in memtest. Dram timing may cause this problem or what. If you can help me I will be really appreciated.
 

signtnight

Commendable
Jan 21, 2017
4
0
1,510
Ok I will try it.Now cpu nb 1.15v and dram 1.6v.Clearly increased the cpu nb a bit over 1.15 but the problem was continuing.But I will rise it more and test.By the way is it needed to rise dram voltage over 1.6v?
 

signtnight

Commendable
Jan 21, 2017
4
0
1,510


Yes, I know. But I dont want to load my cpu much. I saw amd 8350 goes to 4.4 ghz its stock voltage. How do I set the cpu/nb and ht speed. 2200mhz for each is stable or little bit higher ? Now, I set cpu nb voltage to 1.3v and the problem continuing.