New Build - Boot Issue

DMatt7176

Commendable
Jan 23, 2017
2
0
1,510
Hello,

I have just built a new PC over weekend, however when I press the power button the PC boots for a split seconds then shuts down does this for around 30 seconds to a minute then boots up as normal. If i reboot then depending if it doesn't shut down fully i am OK.

originally i wasn't getting any Display when first built and I noticed one of the Pins were bent and managed to straiten it out with a needle do you think this is still an issue? or could it be my CPU.

If i put 1 RAM in its eventually boots, if i stick 2 in it just recycles every time.

I have the following:

Asus Z270E - Gaming MOBO

Corsair Vengance 16GB RAM

Core i7-7700K 4.20GHz

Nvidia 1050TI Graphics Card
 
Solution
Assuming you got all your pins straitened then its probably just a Timing or DRAM voltage issue.
Obtain your SPD info from CPUz and manually enter Primary Timings and Voltage in Bios.
If not sure then List the Part No of your Corsair RAM which can also be got from CPUz.
Assuming you got all your pins straitened then its probably just a Timing or DRAM voltage issue.
Obtain your SPD info from CPUz and manually enter Primary Timings and Voltage in Bios.
If not sure then List the Part No of your Corsair RAM which can also be got from CPUz.
 
Solution