Rampage V Edition 10 Compatibility

Jason Bowers

Reputable
Apr 4, 2014
19
0
4,510
I am trying to figure out if the ROG Rampage V Edition 10 is compatible with Corsair Dominator Platinum Series 32GB (4 x 8GB) DDR4 DRAM 3600MHz C16 Memory Kit (CMD32GX4M4B3600C16). I appreciate any help.

Thank you.
 
Solution


Ok well your CPU officially supports DDR4 2400/2133MHz and anything above that are considered an OC.
That's a very decent processor and at that price they should work.

This usually involves Bios intervention to manually enter SPD information and XMP profiles to get them to work. If you are confident in Bios then go for the Higher OC RAM however there is no guarantee they will work. Make sure you can exchange them if they don't as it will depend on the CPUs IMC strength if they scale or not.

Also you can OC your CPU which can help with Higher frequency DIMMs.


Hi Jason :)
The only set of 32GB Dominators I could find that have been tested in conjunction with your MB are: CMD32GX4M4B3000C15
Not to say your choice would not work however, its always best to consult the MB QVL

Your MB supports up to 8 x DIMM, Max. 128GB, DDR4 3333Mhz with Quad Channel Memory Architecture . however it will also depend on the CPU. List the CPU for better advice.
 


Ok well your CPU officially supports DDR4 2400/2133MHz and anything above that are considered an OC.
That's a very decent processor and at that price they should work.

This usually involves Bios intervention to manually enter SPD information and XMP profiles to get them to work. If you are confident in Bios then go for the Higher OC RAM however there is no guarantee they will work. Make sure you can exchange them if they don't as it will depend on the CPUs IMC strength if they scale or not.

Also you can OC your CPU which can help with Higher frequency DIMMs.
 
Solution