Connections for case front panel to motherboard

welchs101 · Jan 28, 2017

Hi,

I am putting together a computer. Case is HAF932 and MOB is an Asus Prime B250-Plus. Enclosed is a picture of the MOB connections and the available case front panel wires.

Not sure how to connect the two. Also, the MOB has two instances of +/- P LED but I only have one +PLED and one -PLED coming from my case.......thoughts?

To help I am posting a pic of the MOB connections and the case wires available.

[/URL][/img]

bobmanuk · Jan 28, 2017

welchs101 :

I have seen some cases that have a power LED and a lit logo that is also reliant on the power LED, personally, i would just use the one at the top left, left of the power switch.

Usually the coloured wire of the case wires are the positive. if you look on the mothrboard there will be a marked + this is the pin you connect the coloured wire to.

The best thing you can do, is try it and test, the worst thing that will happen is that it doesnt work.

welchs101 · Jan 28, 2017

so don't worry about the +/-PLED in the lower right of the picture?

bobmanuk · Jan 28, 2017

welchs101 :

im not 100% sure, but the top left of the picture is what is on most basic motherboards, so i would suggest using those instead.

fluked · Jan 28, 2017

Could be for different voltages for red vs. blue (doubtful) or for the convenience of different headers, 3-pin vs. 2-pin (most likely).

I 2nd the usage of the top left,

Harj Arora · May 25, 2017

Hi, have solved your issue man? If you have, can you help me out?
I have the same mother board but NZXT S340 case. My case power button works fine, but front audio and microphone jack isn't working and to be honest entirely certain where are HDD LED and PLED?
Thank you

Search

Connections for case front panel to motherboard

welchs101

Distinguished

bobmanuk

Honorable

welchs101

Distinguished

bobmanuk

Honorable

fluked

Commendable

Harj Arora

Prominent

TRENDING THREADS

Latest posts

Moderators online

Share this page