Ok so I built a new pc and now that I try and install my os the same things happen each time
1. Boots like normal and starts set-up process then screen goes black and drive activity button goes dead but the fans are still running and power indicator light remains on
2. According to the bios the gpu temp climbs to 95 degrees Fahrenheit at which point the screen goes black and drive light remains off. Thought it was overheating but I'm seeing much higher temps listed on here for pcs that actually stay running. Mine just kinda dies.
I've tried redoing the temp compound between the cooler and gpu but no change in temp ( the climb free slightly slower but still keeps going. All the cables inside are out of the way of the two case fans and the gpu fan. I've tried running it with the case closed and open on both sides multiple times each. I'm running an Asus mobo with a core 2 quad q9500 gpu with an aftermarket stock cooler and a blackbone custom case. The psi is an evga 80+ 430w psu and 8 gigs of crucial basic ram. Any help, ideas or solutions would be great.
1. Boots like normal and starts set-up process then screen goes black and drive activity button goes dead but the fans are still running and power indicator light remains on
2. According to the bios the gpu temp climbs to 95 degrees Fahrenheit at which point the screen goes black and drive light remains off. Thought it was overheating but I'm seeing much higher temps listed on here for pcs that actually stay running. Mine just kinda dies.
I've tried redoing the temp compound between the cooler and gpu but no change in temp ( the climb free slightly slower but still keeps going. All the cables inside are out of the way of the two case fans and the gpu fan. I've tried running it with the case closed and open on both sides multiple times each. I'm running an Asus mobo with a core 2 quad q9500 gpu with an aftermarket stock cooler and a blackbone custom case. The psi is an evga 80+ 430w psu and 8 gigs of crucial basic ram. Any help, ideas or solutions would be great.