i bulded this pc and one of the metal prong on the motherboard plate went in the hdmi port i didnt saw it at first and i turned on the pc and of course it didnt load, the fan was spinning but no boot no bios. at the end i funded the prong i fixed but the pc still have the problem can it be my motherboard is dead for that prong in the hdmi port? or maybe it wasn't work for the first time? ( sorry for my eng) im sure the problem is in the mobo cuz i tryed anothe psu and nothing changed i scared the cpu can be dead too.
metal prong motherboard backplate
- Thread starter AnzMore21
- Start date
Solution
cin19
Titan
- Mar 14, 2011
- 15,726
- 218
- 112,340
Try unplug the power core first, then remove the battery to clear the CMOS, wait for 5-10 min, plug the battery in and reboot the PC. If the PC will not boot, may try clear the CMOS, and also remove the RAM, boot again. If the PC still does not boot, you may go to local PC shop ask for help, let them test the MB or cpu for you. If you are sure the problem is from MB, try contact the MB manufacturer to see what they can do for you.
thx for the answer but i have alredy tryed all the tings u said and actually i tryed whit another mobo and all work perfectly but i still have the curiosity to know if the main is dead cuz of my error or it wasn't working from the firs time. the cpu is perfectly safe anyway ^^
TRENDING THREADS
-
-
-
Question Help in troubleshooting possible graphics card issue?
- Started by nort99
- Replies: 3
-
Question RX 6600 visual glitches right after upgrading to it- Started by Wamek
- Replies: 4
-
News US sanctions transform China into legacy chip production juggernaut — production jumped 40% in Q1 2024- Started by Admin
- Replies: 35
-
Facebook
Twitter
Instagram