Newbie questions for build

plee1987

Commendable
Jan 30, 2017
10
0
1,510
Hey guys, I'm almost finished with my build and I just wanted to ask a few questions.

Parts list:
msi z270 m5 mobo
I5 7600k cpu
Corsair h100i v2 cooler
4x8gb ballistix ddr4
Msi gtx 1070

1)I'm using the corsair h100i v2 cooler into the NZXT s340 elite case and I FRONT mounted the fans 1st as intake and then I installed the radiator along with a corsair 120mm fan on the back for intake also and a 120mm corsair fan uptop for exhaust. Any problems from this setup? Bad cpu temp?

My build thus far. Is there anyone who spot anything wrong or cables in the wrong place?
30lge3n.jpg


2)The power cable on the corsair cooler pump is rather close to or is touching the ddr4 ram; will the memory stick get hot enough to damage the the power cable somehow? If I mounted the cpu cooler upside down then the power cable would be out of the way of the ram stick but now the word corsair is upside down, and that makes my OCD kick in.

Sorry, the picture is tilted to the left. As you can see the power cables go directly next to the ram stick.
2cncqqq.jpg


Thanks in advance.





 
Solution
1| Your structure seems a little awkward...are the fans in intake or exhaust? You should have the AIO cooler in the front set to intake. In essence the front fans should be intake while the top and rear should be in exhaust.
12142259_1712966175593989_1245798106_n.jpg


2| Nope, you're fine though cable management will help hide the cables to go under or around the motherboard.

Lutfij

Titan
Moderator
1| Your structure seems a little awkward...are the fans in intake or exhaust? You should have the AIO cooler in the front set to intake. In essence the front fans should be intake while the top and rear should be in exhaust.
12142259_1712966175593989_1245798106_n.jpg


2| Nope, you're fine though cable management will help hide the cables to go under or around the motherboard.
 
Solution

plee1987

Commendable
Jan 30, 2017
10
0
1,510
Lutfij, the second picture was turned left. Sorry about that confusion but the first picture I just uploaded should show the build better. And yes I have the front fans as intake and the top fan as a exhaust with the back fan as another intake but I'll try it with both back fans as exhaust, thanks.