Not the first computer I've built, but the first where I've run into this issue. Hitting power has the motherboard cycle through some q-codes before stopping on 62, per the manual it's 'installation of PCH runtime services,' but I'm not sure what that means.
Computer fails to boot, nothing shows up on screen upsetting as I was very much looking forward to running this machine!
I've tried the below -
- Removing GPU and plugging monitor into the onboard HDMI, no dice
- Trying one stick of RAM at a time in each slot, switching slots for both sticks of RAM, no dice
- Flashed the CMOS with and without the GPU, no dice.
Thinking it could be a faulty motherboard but don't even understand what q-code 62 is trying to tell me... any help / advice / guidance would be appreciated! Let me know if any other details I can provde.
Here's the parts list -
Computer fails to boot, nothing shows up on screen upsetting as I was very much looking forward to running this machine!
I've tried the below -
- Removing GPU and plugging monitor into the onboard HDMI, no dice
- Trying one stick of RAM at a time in each slot, switching slots for both sticks of RAM, no dice
- Flashed the CMOS with and without the GPU, no dice.
Thinking it could be a faulty motherboard but don't even understand what q-code 62 is trying to tell me... any help / advice / guidance would be appreciated! Let me know if any other details I can provde.
Here's the parts list -
Case: NZXT Manta
Motherboard: ASUS ROG Maximus VIII Impact (M-ITX)
Processor: Intel i7-7700k
CPU Cooler: Corsair H115i
HDD: Samsung SSD 1TB
RAM: Corsair Vengeance LED 32GB (2x16GB) - DDR4 - 3200MHz
GPU: ASUS ROG nVidia GTX 1080 STRIX
PSU: Corsair AX860