Voltage drop when overclocking

Toggle sidebar Toggle sidebar
O

Old_fritz

Commendable
Dec 24, 2016
10
0
1,510
Hi as the title says my voltage will drop when I try to stress test my amd fx 8320, which ultimately results in a blue screen.

I can go up to 4ghz but anything higher and I'll bluescreen when running prime95. I changed the voltage and on startup it'll do the voltage I set it to (1.32) and when I start the test it drops to like 1.272.

My mobo is a gigabyte GA-78LMT-USB3
 
Solution
MeanMachine41
Hi Old_fritz :)

What you are experiencing is Vdroop and this is controlled by the level of LLC (Load Line Calibration)
It is controlled in Bios and listed as Load Line Control. This is normally set on Auto and differing Bios controls vary. You may be offered to simply switch it on or give it a value. Go to a high setting but not too high.
Sort by date Sort by votes
MeanMachine41

MeanMachine41

Judicious
May 8, 2014
5,195
336
33,390
Hi Old_fritz :)

What you are experiencing is Vdroop and this is controlled by the level of LLC (Load Line Calibration)
It is controlled in Bios and listed as Load Line Control. This is normally set on Auto and differing Bios controls vary. You may be offered to simply switch it on or give it a value. Go to a high setting but not too high.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom