Issue with new msi krait z270

Toggle sidebar Toggle sidebar
N

Nish26

Commendable
Jan 29, 2017
9
0
1,510
Hi All,

I assembled today my new system . Following are the specs :
i7 6700k processor
Msi krait z270 motherboard
evga gtx 1070 ace 3.0
corsair vengeance 1*8gb 2400 mhz
Acer predator xb241h monitor

Having assembled everything , when i start pc , everything powers up and all fans are running and motherboard has lights on . However, i run in to following problem :
- No display not even boot screen
- No beeps indicating any error code
- No power to mouse / keyboard both connected using usb

I have tried so far :
- Moving Ram in different slots
- Removed graphic card
- Reinstalled my cpu
- Reconnected all wires
- Took it to a local computer store and verified my installation with him

Please help .

Regards,
Nish26
 
Sort by date Sort by votes
N

Nish26

Commendable
Jan 29, 2017
9
0
1,510
Have removed the mobo out of cabinet and placed on a rubber mouse pad on my table . No graphic card is attached . Tried again by connecting power supplies.
Everything powers up but still no boot menu or beeps. Checked monitor by using hdmi from my laptop. monitor seems to work fine.
 
Upvote 0 Downvote
alexoiu

alexoiu

Titan
Nov 1, 2012
39,818
249
126,990
The connections seem ok. I guess that you've connected the 8 pin CPU power cable, and not the PCIe one.
As for the no signal, you can try testing the DVI connection on the motherboard with a monitor with DVI port and checking the CPU socket for bent pins.
 
Upvote 0 Downvote
N

Nish26

Commendable
Jan 29, 2017
9
0
1,510
I have used 2*4 pins to connect to cpu power supply and not 1*6 + 1*2 which i think is for gpu.
I tried on a different monitor with on board dvi connection in a local store near my place. How can i check for bent pins on cpu and what can be done if the pins are bent on cpu?? i just purchased everything brand new.
 
Upvote 0 Downvote
N

Nish26

Commendable
Jan 29, 2017
9
0
1,510
Someone told me on msi forums that there are no more beep codes , i should consider looking at the EZ code that are basically 4 leds . I powered on again and i can see boot,vga,dram not glowing at all but only cpu led keeps glowing. Any one can help me debug that please? I checked the pins they are not at all bent.
 
Upvote 0 Downvote
N

Nish26

Commendable
Jan 29, 2017
9
0
1,510
Yes the cpu fan is spinning . I am using an 4-5 year old power supply .. Coolermaster thunder 600 watts with a 2*4 pin attached to 8 pin cpu power input plug.
Here is the link to my power supply : http://www.coolermaster.com/powersupply/thunder/thunder-600w/ . Is it possible that it is providing a different power output to my cpu then what it is expecting since it is a older one ?? Please someone verify it for me as i lack the technical understanding about volatages and all.
 
Upvote 0 Downvote
P

PongoMe

Prominent
Feb 27, 2017
3
0
510
As far as I see it, lot of the people having those problems are using the Corsair Vengeance LPX sticks (different Mhz though).
Did you get it solved?
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom