Can the metal part of a GPU be cut since it doesn't fit in my case

Toggle sidebar Toggle sidebar
Solution
jwcrellin
Make sure you remove the slot guard on your case to make room for the video outs. Open the tab at the back of the pcie slot. Line up the contact points and press down until the latch pops up to lock the card in then put the screw in the metal support bracket to anchor it to the case.
Sort by date Sort by votes
Supahos

Supahos

Expert
Ambassador
Nov 11, 2013
12,756
48
57,640
The part that screws it into your case? If you mean cut the whole thing off definitely no, if just a lil piece to make fit better sure... But don't use something like a dremel. use some sort of tin snips or similar you don't want microscopic tiny metal shavings all over your gpu.
 
Upvote 0 Downvote
jwcrellin

jwcrellin

Reputable
Dec 3, 2016
1,416
39
5,740
Make sure you remove the slot guard on your case to make room for the video outs. Open the tab at the back of the pcie slot. Line up the contact points and press down until the latch pops up to lock the card in then put the screw in the metal support bracket to anchor it to the case.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom