So all was going well after i installed windows 10 on my new ssd until i realised for some reason it created the boot partition on the hdd. So i unplugged the hdd and re installed windows. I then plugged in the hdd and it was not appearing in windows so i looked into the bios and noticed the hdd was showing there but also 2 instances of the ssd one uefi and the other says p1. If i switch to the p1 version it does not boot and says it needs repair.
Any ideas or should i just re format and start again for the 3rd time
Any ideas or should i just re format and start again for the 3rd time