Failed to boot few times before succes to boot and always failed to restart

oct1

Prominent
Feb 14, 2017
4
0
510
Hello I just build a new pc and from the first try to boot it up I got this problem. My pc its failed at the first time boot and I try to check all cable and connection is fine. And when its failed to boot it mostly beeps 6 times, but not always (rarely it beeps 3 times, or no beeps sound at all). But a few weeks I success to turn it on by hold the power button until the pc is shutdown when its failed to boot and try it to turn it on again most likely 4-5 times. Then it will be success to boot. And when the first time install the windows its always failed to restart and when the windows is already installed it still has never been able to restart. I was so confuse because all the fan is spinning. When it success to boot it can run well no problem for 24 hour or even more with no problem. Please HELP......

My PC Specs :
CPU: AMD X4 860K
GPU: Galax GTX 1050 OC single fan
RAM: VenomRX 8gb ddr3 16000Mhz (but the mobo only read it 1333Mhz)
Motherboard: Asrock FM2A68M-DG3+
Power Supply: Gamemax 450W 80+bronze
Hard Disk: Toshiba 1 TB SATA3 7200RPM


UPDATE : I ALREADY UPDATE THE BIOS AND INSTALL WINDOWS 10 AND ALL THE DRIVER + UPDATE ALL. (My pc was work perfectly fine when its success to boot, the problem its only when try to turn it on and restart it)
 

Atomicdonut17

Reputable
Feb 4, 2017
737
0
5,360
What device do you have your computer set to boot off of? Are you able to access the BIOS to try and switch/select a HDD? If so, try that, if if it doesn't work, it could be a number of things, like a DoA motherboard, bent pins on the socket for the CPU (or any connector, for that matter) or a power overdraw/under-draw from something inside. If it refuses to even boot to the BIOS, you're most likely dealing with something more rootly damaged than the HDD.
 

oct1

Prominent
Feb 14, 2017
4
0
510


I able to access the BIOS and select a HDD. What is DoA motherboard, bent pins on the socket for the CPU or a power overdraw/under-draw should make my pc cant boot up permanently right ? my pc can boot up with a 4-5 try and when its boot up everything work very2 well.
 

oct1

Prominent
Feb 14, 2017
4
0
510


So this error is 100% because of the motherboard not because other parts right ??