New build Wont boot up bios, no post beep or display Code 62

Toggle sidebar Toggle sidebar
K

KruMPP

Prominent
Feb 18, 2017
12
0
510
i7 770k
Maximus viii hero mb
16gb ram

we just finished putting together this computer and when we booted it for the first time, the fans and led turned on fine there was just no display or beep. we tried taking out the gpu and still have the same code, unplugging and replugging some cables and still same code, re installing the ram, still same code, even starting with no ram in and we didnt get a beep code. running out of ideas on what it can be, can anyone help?
 
Solution
alexoiu
"i think we tried that but didnt work, but probably didnt do it right. how do we do it correctly"

Download the latest version from https://www.asus.com/Motherboards/MAXIMUS-VIII-HERO/HelpDesk_Download/
Unzip and rename the file from MAXIMUS-VIII-HERO-ASUS-3101.CAP to M8H.CAP
Save the renamed file on a FAT 32 formatted USB drive.
Connect the drive to the designated Flashback port (check the board's manual for its location).
Don't start the power supply, just make sure that it's connected and on.
Press the Flashback button for 3 secs.
Wait until the process ends (more than 10 secs).
Sort by date Sort by votes
K

KruMPP

Prominent
Feb 18, 2017
12
0
510


i think we tried that but didnt work, but probably didnt do it right. how do we do it correctly
 
Upvote 0 Downvote
alexoiu

alexoiu

Titan
Nov 1, 2012
39,818
249
126,990
"i think we tried that but didnt work, but probably didnt do it right. how do we do it correctly"

Download the latest version from https://www.asus.com/Motherboards/MAXIMUS-VIII-HERO/HelpDesk_Download/
Unzip and rename the file from MAXIMUS-VIII-HERO-ASUS-3101.CAP to M8H.CAP
Save the renamed file on a FAT 32 formatted USB drive.
Connect the drive to the designated Flashback port (check the board's manual for its location).
Don't start the power supply, just make sure that it's connected and on.
Press the Flashback button for 3 secs.
Wait until the process ends (more than 10 secs).
 
Upvote 0 Downvote
Solution
K

KruMPP

Prominent
Feb 18, 2017
12
0
510


currently flashing now, will update what happens after
 
Upvote 0 Downvote
K

KruMPP

Prominent
Feb 18, 2017
12
0
510



THANK YOU! we have finally got a screen to show up, but we have a A2 error now on the motherboard but we can go in to the computer on screen
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom