-
T-Mobile Home Internet: Revisiting 5G connectivity for the home after two years
-
Multi-million dollar Cheyenne supercomputer auction ends with $480,085 bid — buyer walked away with 8,064 Intel Xeon Broadwell CPUs, 313TB DDR4-2400 ECC RAM, and some water leaks
Will the H115i fit the Corsair 300R?
- Thread starter novacbane
- Start date
Solution
I'd install the H115i (a 280mm-sized radiator) on top as the 300R does support mounting locations on top for a 240mm or 280mm radiator (you can also install a radiator at the rear but only if its 120mm-sized).
I don't think you can install the H115i in front without any modding. The 2x 140mm front intake fans are in between the frame and the detachable front cover, while inside the frame is the space for the HDD cage.
Based on the official 300R specifications:
I don't think you can install the H115i in front without any modding. The 2x 140mm front intake fans are in between the frame and the detachable front cover, while inside the frame is the space for the HDD cage.
Based on the official 300R specifications:
WrektGlitch
Commendable
- Jun 20, 2016
- 126
- 0
- 1,710
The specs say it has support for 2x 140MM fans in the top, and 2x 140MM fans in the front. I'd front mount the radiator with the fans pulling air through the radiator.
WrektGlitch
Commendable
- Jun 20, 2016
- 126
- 0
- 1,710
You could, but you'd have to make sure that the fans don't extend down too far, and interfere with the MOBO.
- Feb 22, 2015
- 4,102
- 92
- 39,040
I'd install the H115i (a 280mm-sized radiator) on top as the 300R does support mounting locations on top for a 240mm or 280mm radiator (you can also install a radiator at the rear but only if its 120mm-sized).
I don't think you can install the H115i in front without any modding. The 2x 140mm front intake fans are in between the frame and the detachable front cover, while inside the frame is the space for the HDD cage.
Based on the official 300R specifications:
I don't think you can install the H115i in front without any modding. The 2x 140mm front intake fans are in between the frame and the detachable front cover, while inside the frame is the space for the HDD cage.
Based on the official 300R specifications:
CRABBY GUY
Prominent
- Jun 28, 2017
- 20
- 0
- 510
Suggestions requested to mod the 300R to mount the 115i AIO in the front, please. (My first modding experience!)
TRENDING THREADS
-
News Firefox user loses 7,470 opened tabs saved over two years after they can’t restore browsing session- Started by Admin
- Replies: 50
-
Question Sapphire RX 5700 XT Nitro+ is not working in main PCIe slot ?
- Started by digows
- Replies: 20
-
-
Question what should i look out for when buying used ryzen chips?- Started by jordanbuilds1
- Replies: 22
-
-
Facebook
Twitter
Instagram