So when my computer starts up I have EVGA PrecisionX drivers set to run when it starts up. They do run when it starts up and they are set to run a certain fan profile when it starts up. But even though the PX starts the program, it never runs my fan profile unless I open the program. Sometimes it will start the fan profile when I open the program whether I tell it to run that program or not. Any suggestions?
Evga PrecisionX I drivers run at startup but dont start my fan profile
- Thread starter Noah_24
- Start date
Solution
- Nov 11, 2013
- 17,389
- 4
- 66,960
Not sure if this will help you, but I will try. I think you are getting confused between 2 options that are poorly worded:
- "START UP OFF/ON" option on the main screen: Only controls whether a profile is automatically applied at Windows startup. It does not control whether PrecisionX itself starts.
- SETTINGS -> GENERAL -> START WITH OS checkbox: This actually controls whether PrecisionX itself starts at Windows startup.
Use the tooltips to confirm, by hovering your mouse over the options for a little bit of time. And if you are wanting to control whether PrecisionX itself starts at Windows startup, you need to be using/checking the second option.
EVGA: You can do better to make these options clearer.
Regards,
Jacob
http://forums.evga.com/EVGA-Precision-X-16-Not-starting-with-Windows-m2331358.aspx
see if that resolves
if not try to post at evga and see if theres a new bug or setting to be used from there fanboys
good luck
maybe just one of them things ? just over 1/2 way down the page for '' Espen84 '' post
http://forums.evga.com/EVGA-PrecisionX-16-Page-16-m2218090-p16.aspx
- "START UP OFF/ON" option on the main screen: Only controls whether a profile is automatically applied at Windows startup. It does not control whether PrecisionX itself starts.
- SETTINGS -> GENERAL -> START WITH OS checkbox: This actually controls whether PrecisionX itself starts at Windows startup.
Use the tooltips to confirm, by hovering your mouse over the options for a little bit of time. And if you are wanting to control whether PrecisionX itself starts at Windows startup, you need to be using/checking the second option.
EVGA: You can do better to make these options clearer.
Regards,
Jacob
http://forums.evga.com/EVGA-Precision-X-16-Not-starting-with-Windows-m2331358.aspx
see if that resolves
if not try to post at evga and see if theres a new bug or setting to be used from there fanboys
good luck
maybe just one of them things ? just over 1/2 way down the page for '' Espen84 '' post
http://forums.evga.com/EVGA-PrecisionX-16-Page-16-m2218090-p16.aspx
- Nov 11, 2013
- 17,389
- 4
- 66,960
lol I use that perx 16 with my 980ti and you know , never set a fan profile with it never had reason to , sorry .
maybe like I said post at evga forums and see what there guys / gurus have to say that do use it
i'll look in mine and see like using the OSD to show what I want on the screen was not so easy took a few trys to get it how I wanted onec you find the right combo and what to check or un check ..
I used afterburner as well but I never used it fan profile
loks like the same story here as well
[evga tech ]
''Thank you everyone for letting us know about this issue. We are looking into it, but there's no further info at this time. Once I know more I'll pass it along to you.''
http://forums.evga.com/PrecisionX-5310-custom-fan-curve-bug-on-startup-m2419579.aspx
''The last selection is the startup section, which allows Precision X to load when booting into Windows. When enabled, it will automatically apply a selected saved profile if allowed.''
http://www.anandtech.com/show/8589/anandtech-guide-to-video-card-overclocking-software/5
I wonder if you still got to add it to a profile save number as you see here and hit apply
http://images.anandtech.com/doci/8589/EVGA%20Profiles.PNG?_ga=1.194963752.406201976.1468451130
http://images.anandtech.com/doci/8589/Main%20-%20capture.PNG?_ga=1.89468190.406201976.1468451130
????? I never had to use it and this card don't require it that I use now
maybe like I said post at evga forums and see what there guys / gurus have to say that do use it
i'll look in mine and see like using the OSD to show what I want on the screen was not so easy took a few trys to get it how I wanted onec you find the right combo and what to check or un check ..
I used afterburner as well but I never used it fan profile
loks like the same story here as well
[evga tech ]
''Thank you everyone for letting us know about this issue. We are looking into it, but there's no further info at this time. Once I know more I'll pass it along to you.''
http://forums.evga.com/PrecisionX-5310-custom-fan-curve-bug-on-startup-m2419579.aspx
''The last selection is the startup section, which allows Precision X to load when booting into Windows. When enabled, it will automatically apply a selected saved profile if allowed.''
http://www.anandtech.com/show/8589/anandtech-guide-to-video-card-overclocking-software/5
I wonder if you still got to add it to a profile save number as you see here and hit apply
http://images.anandtech.com/doci/8589/EVGA%20Profiles.PNG?_ga=1.194963752.406201976.1468451130
http://images.anandtech.com/doci/8589/Main%20-%20capture.PNG?_ga=1.89468190.406201976.1468451130
????? I never had to use it and this card don't require it that I use now
- Nov 11, 2013
- 17,389
- 4
- 66,960
http://forums.evga.com/EVGA-PrecisionX-Custom-fan-curve-profile-is-not-saved-at-program-exit-m2527102.aspx
seems here again the same story with that
maybe that reinstall may help seems I had to for some reason like my first install of it something did not seem to work right , oh ya, my card with perx 16 would not clock down to its idle low power state , but after I reinstalled it it them worked properly ?
maybe try that any good overclocking profiles you can save in a new folder out side per,x and copy and past them back in to the new install proper folder in the programs file
seems here again the same story with that
maybe that reinstall may help seems I had to for some reason like my first install of it something did not seem to work right , oh ya, my card with perx 16 would not clock down to its idle low power state , but after I reinstalled it it them worked properly ?
maybe try that any good overclocking profiles you can save in a new folder out side per,x and copy and past them back in to the new install proper folder in the programs file
- Nov 11, 2013
- 17,389
- 4
- 66,960
good deal , like I thought after some time I had to reinstall as well ..
anyway glad it worked out and enjoy
anyway glad it worked out and enjoy
TRENDING THREADS
-
-
-
Question What is PCB form factor ATX for PCIe Graphics Card?
- Started by mmp09
- Replies: 5
-
News Windows 11 will reportedly display a watermark if your PC does not support AI requirements- Started by Admin
- Replies: 7
-
Latest posts
-
-
Question why my pc dont have sound after install new Nvidia GPU Card?
- Latest: beyondlogic
-
-
-
Facebook
Twitter
Instagram