HI, I've built a new PC today (for the first time).
No matter what I did I am not able to get it to display anything.
I've connected another PC to the screen and DVI cable I'm using to make sure that's not the problem.
I've gone over "PERFORM THESE STEPS before posting about POST/boot/no video problems!" (http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems) and have done most (I can't get a system speaker anywhere and I can't tell if static electricity is the issue).
If it's relevant I had an issue where the PC will turn on, and reset every ~20 seconds (no display showed), taking out and reinstalling the RAM solved that, still no display.
When connecting both parts of the 24 pin connector (the 20 pin and 4 pin) it would not have turned on, disconnecting the 4 pins helped. realizing that's not good enough I've removed the mobo screws, removed it, put it back on and now it will turn on with the 24 pins connected.
Right now I've went back to pure essentials, I have only one stick of RAM connected (to the slot further away from the CPU), 24 pin power connector, 4 pin CPU power connector, power button (not reset), Power led,Using the on board DVI connector (GPU not connected), cpu fan and system fan.
That's it, still shows no display.
Any pointers on what to try next?
CPU Intel® Core™ i7-7700
SSD Intel® SSD 600p 256gb
Mem HyperX Savage 16GB (2 x 8GB)
Case Corsair Obsidian 250D Mini-ITX
CPU Cooler Arctic Alpine 11 Rev.2
GPU Gigabyte GTX 1050 Ti G1 Gaming OC 4GB
PMU Antec 600W VP600P
Motherboard Gigabyte GA-H170N-WIFI
No matter what I did I am not able to get it to display anything.
I've connected another PC to the screen and DVI cable I'm using to make sure that's not the problem.
I've gone over "PERFORM THESE STEPS before posting about POST/boot/no video problems!" (http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems) and have done most (I can't get a system speaker anywhere and I can't tell if static electricity is the issue).
If it's relevant I had an issue where the PC will turn on, and reset every ~20 seconds (no display showed), taking out and reinstalling the RAM solved that, still no display.
When connecting both parts of the 24 pin connector (the 20 pin and 4 pin) it would not have turned on, disconnecting the 4 pins helped. realizing that's not good enough I've removed the mobo screws, removed it, put it back on and now it will turn on with the 24 pins connected.
Right now I've went back to pure essentials, I have only one stick of RAM connected (to the slot further away from the CPU), 24 pin power connector, 4 pin CPU power connector, power button (not reset), Power led,Using the on board DVI connector (GPU not connected), cpu fan and system fan.
That's it, still shows no display.
Any pointers on what to try next?
CPU Intel® Core™ i7-7700
SSD Intel® SSD 600p 256gb
Mem HyperX Savage 16GB (2 x 8GB)
Case Corsair Obsidian 250D Mini-ITX
CPU Cooler Arctic Alpine 11 Rev.2
GPU Gigabyte GTX 1050 Ti G1 Gaming OC 4GB
PMU Antec 600W VP600P
Motherboard Gigabyte GA-H170N-WIFI
Facebook
Twitter
Instagram